Showing posts with label alignment. Show all posts
Showing posts with label alignment. Show all posts

Monday, September 17, 2012

Pulling the jaws by elastic bands

So the crowding on my lower left jaw seems to have corrected quite nicely over the Eid holidays. While the permanent tooth on my upper jaw was now held by wires and plate to facilitate its eruption progress over time.

On this follow up visit, my dentist mentioned that my jaw lines are "misaligned" and they need to be corrected while the procedures continue. Meaning my jaws were mis-aligned as something like this:
original picture taken from: http://www.discover-how-to-draw.com/how-to-draw-a-skull-in-front-view.html
Weird, eh? So how can this be corrected? Well, what is better than bringing some teeth back to alignment with a pair elastic bands?
Yup. This is practically how the teeth are being brought back into alignment. I had to wear two elastic bands actually.

Wanna see how big is the elastic band when kept on its own?
The relaxed elastic band in comparison to the plates that i have to wear
on my upper and lower jaws
Disclaimer: If anyone is disgusted by these pictures, please press Ctrl+W (or Command+W on Mac)

This much elastic band is spanned over the length of the jaw. You can understand how much tension it puts on the jaws. It used to hurt when i used to take it off or put it on because there is a sudden HIGH PRESSURE snap of the elastic on the hooks which jerk your teeth like super crazy.

Pure mechanical stuff!





Monday, September 10, 2012

A fair progress over the Eid holidays

The crowding seemed to have lined up pretty nicely over the Eid holidays AlHamduLillah. So it definitely deserves a before - after shot on this post. Notice the correction of alignment of the tooth on my lower-left side of the mouth (your lower-right side)

AFTER:
Picture taken: 13th August 2012

BEFORE:
Picture taken: 26th June 2012

That is definitely a fair improvement over a period of about one and half months, isn't it?



Disclaimer: If anyone is disgusted by these pictures, please press Ctrl+W (or Command+W on Mac)




Saturday, June 23, 2012

Got my bite plate for the lower jaw

So, with the teeth of my lower jaw wired up, sometimes there is a chance that the pressure of the wire trying to correct the alignment would push the teeth backwards and form a bad alignment. What needs to be done is to also put pressure from the back side so that the the teeth are held in the desired alignment instead of forming a bad alignment.

A bite plate is a small, removable acrylic appliance that fits on the roof of the mouth behind the front teeth. It should feel secure and fit snugly - source
source: uniortholab.com
Bite plate behind the teeth on my lower jaw.
Notice the whitish transparent plates at the bottom and its clamps holding on to the molars beside the gaps.

Disclaimer: If anyone is disgusted by these pictures, please press Ctrl+W (or Command+W on Mac)

The clamps were needed to hold the molars in place so that the tension of the wire between the molars and the front teeth did not pull the molars forward, but instead pulled the front teeth along backward. Hence, the clamps would hold the molars in place to achieve just that InshAllah.